Tascam MD-301mkII User Manual

All or one of the tracks, or a specified
portion (A-B) of an MD can be played
repeatedly. Program playback and Shuffle
playback can also be repeated.

1. In the Stop mode, press the [PLAY

MODE] button to select one of the
following repeat play modes.

CONTINUE

Normal repeat

SHUFFLE MODE

Shuffle repeat

PGM MODE

Program repeat

2. Press the [REPEAT] button on the remote

control unit once to display "REPEAT
ALL".

… "

" lights up.

3. Press the [

PLAY] button.

The tracks will be played repeatedly in
the specified mode.

… To release REPEAT playback and resume

normal playback, press the [REPEAT]
button repeatedly until "REPEAT OFF"
appears.

… The Repeat Playback mode will not be

canceled even when the power is turned
off.

1. During playback in the "CONTINUE

MODE", press the [REPEAT] button on the
remote control unit twice.

… "REPEAT 1" appears ("

" and

"

" light up).

2. Press the [

PLAY] button. The current

track will be repeated.

3. The track to be repeated can be

changed by turning the [

TRACK

]

dial or by pressing the [

TRACK

]

buttons or numeric buttons (1 to 9, 0, +10)
on the remote control unit.

… Single-track repeat is unavailable in the

"SHUFFLE MODE" or "PGM MODE".

A specified portion (between A and B) of a
track can be played repeatedly.
1. During playback, press the [A-B] button

on the remote control ("REPEAT A–" is
displayed, and "

" lights up,

"

" blinks) at the starting point (A) of

the portion you want to repeat.

2. Press the [A-B] button again ("REPEAT A-

B" is displayed, and "

" and

"

" light steadily) at the ending point

(B).  The portion (A-B) will be played
repeatedly.

… A-B repeat playback of portions

extending over more than one track is
not possible during programmed
playback or shuffle playback.

… To cancel Repeat playback and resume

normal playback, press the [A-B] button
or [REPEAT] button again. 
("REPEAT OFF" is displayed.)

… Press the [

STOP] button to erase the

specified portion (between A-B).

By connecting this deck with a timer
(commercially available), playback can be
started at a specified time.
1. Insert a pre-recorded MD and set the

[TIMER] switch to [PLAY].

2. Select the amplifier's input which allows

this deck to play back.

… Timer playback is available when

"SHUFFLE MODE", "PGM MODE", "ALL
REPEAT" or "REPEAT SINGLE" playback is
selected.

3. Set the timer to the desired start time

and turn off the power.
When the set time comes, each
component will be turned on and
playback will start.

… Set the [TIMER] switch back to [OFF]

after timer playback.

– 14 –