Tascam IF-DM User Manual

 

18

This allows restricting the number of channels being sent to the 
computer to 16 for reduced host load, or setting the full channel 
count of 32. Especially at high sampling rates, if you don’t 
need the full 32 channel count from the mixer to the computer 
for your project, you will get better performance from your 
computer by setting this to 16. 
(Note) Before changing this setting, be sure that no audio 
applications are running, and no sound is being played back 
through the IF-FW/DM 

MK

II. After changing the setting, wait a 

few seconds for the driver and OS to reconfigure to the new 
setting before re-launching your audio application. 

This tells you what version of the IF-FW/DM 

MK

II software is 

currently being used. Updates may be made available through 
the TASCAM web site at 

www.tascam.com

 

 

 

Below are instructions for setting up common DAW software 
applications to use the IF-FW/DM 

MK

II interface.  If your app isn’t 

covered here, but does support ASIO on PC or Core Audio on the 
Mac, or if you need more detailed instructions to configure your 
app, please refer to the documentation for your app to set up an 
audio/MIDI interface. 
 

WDM is the standard Windows driver interface, and provides 
Audio and MIDI services to the OS and all applications that 
support WDM.