Tamron Satellite Radio IC-R10 User Manual
3
BASIC OPERATION
19
■
Listening example 1 — television broadcast in WFM mode
1. Turn power ON
Push [POWER] for 1 sec. to turn
power ON.
power ON.
2. Select VFO
Push [CLR] or [V/M] to select VFO
mode.
mode.
3. Adjust volume
Rotate [VOL] to obtain the desired
level of audio output.
level of audio output.
4. Adjust squelch
Rotate [SQL] fully counterclockwise,
then clockwise until the audio noise
just disappears.
then clockwise until the audio noise
just disappears.
5. Select the receive
mode
Television sound is broadcast in
WFM mode. If the receiver is not al-
ready in WFM mode:
WFM mode. If the receiver is not al-
ready in WFM mode:
Push [MODE] one or more times until
WFM appears in the function display.
WFM appears in the function display.
6. Select the tuning step
In most countries* television stations
are spaced about 50 kHz apart. To
select the 50 kHz tuning step:
are spaced about 50 kHz apart. To
select the 50 kHz tuning step:
While pushing [FUNC], push
[
[
(MODE)
TS], then rotate [DIAL] until
the function display shows “50 kHz”.
Push [CLR] after setting to return to
VFO mode.
Push [CLR] after setting to return to
VFO mode.
*Check listings for your area.
VFO
WFM
TS 50.00kHz
SET TS
TS 50.00kHz
TS 50.00kHz
[DIAL]
VFO
WFM
144.0000
Appears
MODE