Optibase MGW 2400 WMT User Manual

Chapter 2 

• Getting Started 

1.  Choose a dry location for MGW 2400, which complies 

with the requirements regarding temperature specified at 
page 98. 

2.  Attach the rubber feet to MGW 2400 or rack-mount it into 

a rack-mount chassis. To rack-mount MGW 2400, refer to 
the following section. 

MGW 2400 can be used as a stand-alone device or rack-
mounted into a 19”, 23” or ETSI rack-mount chassis. To rack-
mount MGW 2400, do the following: 

1.  Remove the rubber feet from the bottom, if they have been 

already attached. 

2.  Use the supplied screws to attach the brackets to the 

corners of the MGW 2400 chassis. 

3.  Attach MGW 2400 to the rack-mount chassis. 

Disconnect the power cable from the power connector while mounting MGW 

2400.