Optibase MGW 2400 WMT User Manual

Page of 156
Chapter 2 
• Initial Configuration 
To set communication parameters in HyperTerminal: 
1. Open 
HyperTerminal and click Properties 
 in 
HyperTerminal’s toolbar. The Properties screen appears. 
2.  From the Connect using list, choose COM1 to which you 
will connect MGW 2400 and click Configure. The COM 
Properties screen appears. 
 
Figure 9: HyperTerminal’s COM Properties Screen 
3.  Enter the parameters into the respective fields as shown in 
4. Click 
OK; HyperTerminal is now ready to communicate 
with MGW 2400. 
21