Optibase MGW 2400 WMT User Manual

Chapter 2 

• Initial Configuration 

MGW 2400 comes with two network interface cards. To 
increase performance, you can assign one network to manage 
and configure MGW 2400, and the other one to transmit. MGW 
2400 lets you change network settings for both network 
interface cards. 

By default, both NICs are set to 100Mbps Full Duplex. If 
relevant, you have to set the network mode for each NIC 
separately. 

1.  Log on to MGW 2400’s Configuration Utility as 

Administrator; the Main menu appears. 

2. Press 

2 (Change Network Settings); the Network menu 

appears as illustrated in Figure 12. 

3.  To choose the network mode for NIC A, press 3; to choose 

the network mode for NIC B, press 4; the Network Mode 
Settings menu appears as illustrated in Figure 13. 

4.  Consult your network administrator before selecting one of 

the displayed modes. 

5.  Press the respective number key to select the desired 

network mode and follow the on-screen instructions; the 
respective network mode is defined. 

•  You must set the network mode for each NIC separately. 
•  Transmission to external WMS servers requires 100Mbps Full Duplex.