Optibase MGW 2400 WMT User Manual

Chapter 2 

• Initial Configuration 

If the relevant NIC or network segments are not DHCP enabled, 
you have to edit TCP/IP settings manually when logging on for 
the first time. If desired, you may disable DHCP and set or 
change TCP/IP settings manually. 

You disable DHCP and/or edit TCP/IP settings as explained 
below. 

1.  Log on to MGW 2400’s Configuration Utility as 

Administrator; the Main menu appears. 

2. Press 

2 (Change Network Settings); the Network menu 

appears. 

3.  To edit TCP/IP settings for NIC A, press 1, or for NIC B, 

press 2; DHCP options appear for the NIC you chose. 

4. Type 

manually); DHCP is disabled and TCP/IP options appear 
as illustrated in Figure 15. 

5.  To define or change the chosen NIC's TCP/IP settings, 

refer to the next page.