Optibase MGW 2400 WMT User Manual
Chapter 3
• Viewing and Setting Module Parameters
Viewing and Setting Module Parameters
To access the desired encoding module's parameters, click the
associated image in the Modules page.
associated image in the Modules page.
I/O Parameters
Figure 25: Encoding Module - I/O Parameters
Video Settings Comments
Source
Composite
Analog video signal that combines
all the components in one signal.
all the components in one signal.
S-Video
Analog video signal that carries
separate luminance and chroma
signals.
separate luminance and chroma
signals.
SDI
Digital video signal, available for
MGE-400D encoding modules.
MGE-400D encoding modules.
Color System
NTSC, PAL,
Auto Detect
Auto Detect
Determines the color system.
MGW 2400 and your source
device must be set to the same
color system parameter. If you
choose Auto Detect, MGW 2400
automatically detects the correct
color system.
MGW 2400 and your source
device must be set to the same
color system parameter. If you
choose Auto Detect, MGW 2400
automatically detects the correct
color system.
Input Detect
No source
Source detected
67