Optibase MGW 2400 WMT User Manual

Chapter 3 

• Editing Channel Parameters 

•  For WMS Multicast, refer to the section below. 
•  For WMS Unicast, refer to page 89. 
•  For writing to a file, refer to page 90. 

•  If you are in the process of adding a channel, select the 

desired target and click Edit 

; a window appears 

displaying the associated parameters. 

•  If you are in the process of editing a channel, select the 

desired target; the associated parameters appear to the right. 
Parameters are unavailable for editing if the channel is 
running. 

External WMS 

<None> (default) 

No external WMS 
server is used. 

  

IP address of an external WMS 
server you may have configured for 
this channel. 

If you wish to use an 
external WMS server, 
choose the desired 
server's IP address 
from the list. This 
WMS server must 
belong to the same 
VLAN and workgroup 
as MGW 2400. 
If you do not find the 
desired server's IP 
address, go to the 
External WMS page in 
order to add it to the 
Servers list. Refer to 
page 64 for 
instructions.