Oracle Vacuum Cleaner CPU-56T User Manual

Feature

Non−Operating

Operating

Shock

5g/11 ms halfsine

15g/11 ms halfsine

Free fall

100 mm / 3 axes

1,200 mm / all edges and corners
(packed state)

The board power requirements depend on the installed hardware accessories. In the
following table you will find typical examples of power requirements without any
accessories installed. If you want to install accessories on the board, the load of the
respective accessory has to be added to that of the board. For information on the
accessories’ power requirements, refer to the documentation delivered together with the
respective accessory or consult your local Force Computers representative for further
details.

The power supply has to meet the requirements given in the tables below.

Table 6:

 Power Requirements

Requirement

5V

12V

Minimum Voltage

4.88V

11.64V

Typical Voltage

5V

12V

Maximum Voltage

5.25V

12.6V

Typical Current

6A

1.5A

Maximum Current

7A

1.63A

Typical Power Requirement

30W

18W

Maximum Power Requirement

35W

20W

Note:

a

The CPU board only powers up if the 5V and 12V supply voltages are stable and

within their limits. This complies to the VMEbus specification. However, there are
systems which are not fully VMEbus−compliant. The power supplies of these systems
do not turn on the 12V supply if the 5V supply has not been loaded before. Use a
VMEbus board which loads the 5V in these systems to avoid a power−up deadlock
situation.