Oracle Vacuum Cleaner CPU-56T User Manual
Introduction
OpenBoot Firmware
SPARC/CPU−56T
91
boot <device−specifier> <filename> <−bootoption>
Optional Boot Parameters
Table 13:
Boot Parameters
Parameter
Description
<device−specifier>
Name (full path or alias) of the boot device. Typical values are
cdrom, disk, floppy, net or tape.
cdrom, disk, floppy, net or tape.
<filename>
Name of program to be booted
The filename parameter is relative to the root of the selected
device. If no filename is specified, the boot command uses the
value of the boot file NVRAM parameter. The NVRAM
parameters used for booting are described in the following
section.
The filename parameter is relative to the root of the selected
device. If no filename is specified, the boot command uses the
value of the boot file NVRAM parameter. The NVRAM
parameters used for booting are described in the following
section.
a
<−bootoption>
Bootoption may be one of the following:
a
−a: Prompts interactively for device and name of boot file
−h: Halts after loading program
−r: Reconfigures Solaris device drivers after changing
hardware configuration
−v: Prints verbose information during boot procedure
−h: Halts after loading program
−r: Reconfigures Solaris device drivers after changing
hardware configuration
−v: Prints verbose information during boot procedure
Boot Devices
To explicitly boot from the internal disks using the Forth Monitor, enter:
ok
a
boot disk
or
ok
a
boot disk−2
To retrieve a list of all device alias definitions, enter at the Forth Monitor command
prompt:
prompt:
devalias
The following table lists device aliases available for SCSI devices.
a
Table 14:
OpenBoot Aliases for SCSI Devices
Alias
SCSI Device
a
SCSI Interface
disk
Disk SCSI−target−ID 0
1
diskf
Disk SCSI−target−ID f
1
diske
Disk SCSI−target−ID e
1
diskd
Disk SCSI−target−ID d
1