Oracle Vacuum Cleaner CPU-56T User Manual

When OBDIAG is called, the <obdiag> test prompt appears and you can now choose the
required test. You can run single tests, a number of tests, all tests, or all tests with
exceptions. If the test has passed successfully, a short test comment will appear on screen.
In order to return to the main menu, hit the enter key.

In order to terminate OBDIAG and return to OpenBoot, enter

a

The OpenBoot prompt will then reappear.

a

Apart from testing the hardware, you can also call several commands which can be seen
in the ODBIAG main menu. The following table provides an overview of these
commands.

a

Table 16:

 OBDIAG Commands

Command

Description

exit

Exits obdiag tool

help

Prints this help information

setenv

Sets diagnostic configuration variable to new value

printenvs

Prints values for diagnostic configuration variables

versions

Prints selftests, library, and obdiag tool versions

test−all

Tests all devices displayed in the main menu

test 1,2,5

Tests devices 1, 2, and 5

except 2,5

Tests all devices except for devices 2 and 5

what 1,2,5

Prints some selected properties for devices 1, 2, and 5

OBDIAG provides a brief excerpt of the OpenBoot configuration variables. The values of
the variables are displayed after entering the following command:

You can decide whether the chosen test will either stop at the occurrence of the first error
or continue to test the hardware. It is also possible to run the test more than once or
produce a detailed print−out of the test.

The example below shows the detailed print out of an OBDIAG test.

a

Example:

a