Oracle Vacuum Cleaner CPU-56T User Manual

Page of 145
Diagnostics
OpenBoot Firmware
SPARC/CPU−56T
99
probe−scsi−all
The actual response depends on the devices on the SCSI buses.
Note:
a
A terminal message as answer to the command probe−scsi−all can take up to two
minutes.
ok
a
probe−scsi−all
/pci@1f,0/scsi@2
aa
Target 6
Unit 0 Disk Removable Read Only Device SONY CD−ROM CDU−8012 3.1a
aa
/pci@1f/pci@4,1/scsi@2
aa
Target 3
Unit 0 Disk FUJITSU M2952ESP SUN2.1G2545
ok
Single Device
To test a single installed device, enter:
test <device−specifier>
This executes the self−test device method of the specified device node.
Group of Devices
To test a group of installed devices, enter:
test−all
All devices below the root node of the device tree are tested. The response depends on the
devices having a self−test method. If a device specifier option is supplied at the command
line, all devices below the specified device tree node are tested.
Clock
To test the clock function enter:
ok
a
watch−clock
Watching the ‘seconds’ register of the real time clock chip.
It should be ‘ticking’ once a second.
Type any key to stop.
22
ok