ooma Hub User Manual

Now that you’ve installed your ooma Hub device, all that’s left to do is install your ooma Scout devices. Each 

additional phone you want to use with the ooma system must be connected to an ooma Scout.

Your initial setup will look like:

Connect a phone to an ooma Scout:

  If you have DSL, trace the phone cable to the wall. Unplug and remove any existing DSL filters or 

splitters. Note: Some DSL filters and splitters are mounted flat on the wall jack.

  Unplug the phone cable from your phone and plug it into the port labeled 

 on the ooma Scout.

  Use a phone cable to plug your phone into the port labeled 

on the ooma Scout (a short phone 

cable is provided). 

  Plug one end of the AC adaptor into the port labeled

 on the ooma Scout and the other end into 

a power outlet. 

Now your setup should look like this:

Within 30 seconds, the clear ooma Tab at the top left corner should turn blue. Pick up the phone connected to 

the ooma Scout and you should hear the signature ooma dialtone.

Phone Jack Power

Phone Jack

Phone Jack

DSL Filter