ONKYO DR-L50 User Manual
37
1
Listening to the Radio
There are two ways to select radio stations:
• Manual tuning
• Presetting radio stations then selecting the preset
• Manual tuning
• Presetting radio stations then selecting the preset
channels
Unit
Tuning in a weak frequency (only for FM stations)
When you tune in a stereo FM station, the FM STEREO indicator
lights up if the signal is sufficiently strong.
lights up if the signal is sufficiently strong.
If the signal is weak, you may not be able to tune to the station.
In this case, press MODE on the remote controller.
The FM STEREO indicator and AUTO goes off. Then select the
station to which you want to listen. (At this time, the station will be in
mono and interstation noise will be heard.)
In this case, press MODE on the remote controller.
The FM STEREO indicator and AUTO goes off. Then select the
station to which you want to listen. (At this time, the station will be in
mono and interstation noise will be heard.)
3
Tuning Manually
Remote controller
Unit
Remote
controller
INPUT SELECTOR
Remote
controller
TUNING
Unit
Remote
controller
MODE
Theater-Dimensional
PROGRESSIVE SCAN
IPM
TUNING PRESET
2/3
PRESET MEMORY
INPUT
2/3
1
2
Presetting Radio Stations
You can preset up to 30 AM and FM stations.
4
Unit only
Unit
Remote
controller
TUNER PRESET
Unit only
TV/ SETUP
TV/ SETUP
TEST TONE
SP SETUP
CH SEL
DISTANCE
SW MODE
UP
TV MUTING
TV
POWER
TV
INPUT
T-D SETUP
IPM
DOWN
TV VOL
+
TV VOL -
9
TV CH -
TV CH
+
VOLUME
ON
STANDBY
INPUT SELECTOR
RECEIVER
COND.M
LAST M
FUNC.M
ANGLE
AUDIO
SUBTITLE
T-D/ ST
LATE NIGHT
TOP MENU
MENU
RETURN
DVD
SETUP
REPEAT
TUNING
TUNER PRESET
MD / CDR / TAPE
A-B
STEP/ SLOW
TIMER
CLEAR
PROGRAM
SEARCH
ACOUSTIC
CONTROL
CONTROL
SURROUND
RANDOM
--/---
MODE
SLEEP
MUTING
DIMMER
DISPLAY
CLOCK
MODE
+10
0
SHIFT
9
4
5
6
7
8
1
2
3
INPUT SELECTOR
2/3
TUNER PRESET
4/¢
MODE
TUNING
1/¡
TUNING
Tune in the radio station you wish
to preset (see steps in the left
column of this page).
to preset (see steps in the left
column of this page).
Press PRESET MEMORY.
The preset number starts flashing in the
display.
display.
(Within about 8 seconds), press
TUNING/PRESET
TUNING/PRESET
2/3 on the unit
or TUNER PRESET
4/¢ on the
remote controller to select the
preset number.
preset number.
Press PRESET MEMORY.
The radio station is registered to the
preset channel.
To register another preset station, repeat
steps 1 to 4.
preset channel.
To register another preset station, repeat
steps 1 to 4.
Press INPUT
2/3 on the unit or
INPUT SELECTOR
2/3 on the
remote controller repeatedly to
select the band (FM or AM).
select the band (FM or AM).
e.g. When FM is selected.
Press and hold TUNING/PRESET
2/3 on the unit or TUNING on the
remote controller for about
1 second.
2/3 on the unit or TUNING on the
remote controller for about
1 second.
• When the band is FM
Auto tuning starts. The frequency
changes in 50 kHz steps.
When a broadcast is received, scanning
stops and the frequency flashes in the
display.
changes in 50 kHz steps.
When a broadcast is received, scanning
stops and the frequency flashes in the
display.
• When the band is AM
The frequency changes as follows:
– (South American model)
– (South American model)
In 10 kHz steps
– (Other models)
In 9 kHz steps
When you release the button, the frequency
stops changing and flashes in the display.
stops changing and flashes in the display.
While the frequency is flashing (for
about 5 seconds), press
TUNING/PRESET
about 5 seconds), press
TUNING/PRESET
2/3 on the unit
or TUNING
1/¡ on the remote
controller to change the frequency.
• The frequency changes each time you
press the button.
• You can change the frequency as long
as the frequency in the display is
flashing. Each press of either button
causes the frequency to flash for about
5 seconds.
flashing. Each press of either button
causes the frequency to flash for about
5 seconds.
2
3