ONKYO DR-L50 User Manual
43
Using the Timer Functions
1
2
Setting the current date and time
TIMER
«
«
4
5
Start the clock.
Match the date, time etc. then press
ENTER. The display switches back to the
function.
ENTER. The display switches back to the
function.
■ Displaying the current time
Press CLOCK on the remote controller.
If the clock is not set, “ADJUST” flashes. Please set the
clock.
If the clock is not set, “ADJUST” flashes. Please set the
clock.
When the power on, press CLOCK on the remote control to
display current date and time. Press CLOCK again to return to
the previous display.
display current date and time. Press CLOCK again to return to
the previous display.
When the unit is in standby mode, press CLOCK on the
remote control to display the current date and time. The
display will disappear after 7 seconds. (Power saving mode)
remote control to display the current date and time. The
display will disappear after 7 seconds. (Power saving mode)
This manual uses the 24-hour display to
describe how to set the clock. The clock
display may also be switched to a AM/PM
display.
describe how to set the clock. The clock
display may also be switched to a AM/PM
display.
Caution
• In the event of a power outage, or the power cord
being removed from the socket, the clock display
will disappear. Please reset the time again.
will disappear. Please reset the time again.
• When using the clock functions, make sure that the
power cord is connected to a proper power supply.
3
DISPLAY
«
Blinking
«
Display disappears after 7 seconds
Display switches back to the function.
CLOCK
TV/ SETUP
TV/ SETUP
TEST TONE
SP SETUP
CH SEL
DISTANCE
SW MODE
UP
TV MUTING
TV
POWER
TV
INPUT
T-D SETUP
IPM
DOWN
TV VOL
+
TV VOL -
9
TV CH -
TV CH
+
VOLUME
ON
STANDBY
INPUT SELECTOR
RECEIVER
COND.M
LAST M
FUNC.M
ANGLE
AUDIO
SUBTITLE
T-D/ ST
LATE NIGHT
TOP MENU
MENU
RETURN
DVD
SETUP
REPEAT
TUNING
TUNER PRESET
MD / CDR / TAPE
A-B
STEP/ SLOW
TIMER
CLEAR
PROGRAM
SEARCH
ACOUSTIC
CONTROL
CONTROL
SURROUND
RANDOM
--/---
MODE
SLEEP
MUTING
DIMMER
DISPLAY
CLOCK
MODE
+10
0
SHIFT
9
4
5
6
7
8
1
2
3
CLOCK
DISPLAY
TIMER
2/3/5/∞
ENTER
ENTER
j
Before operating the
remote controller
remote controller
Press MODE RECEIVER.
Press TIMER repeatedly until
“CLOCK” appears in the display on
the unit, then press ENTER.
“CLOCK” appears in the display on
the unit, then press ENTER.
Press the cursor buttons (
5/∞) to
select a day of the week, then press
ENTER.
ENTER.
While the desired day of the week is
flashing, press ENTER.
flashing, press ENTER.
Days of the week are displayed as follows:
SUN (Sunday)
THU (Thursday)
MON (Monday)
FRI (Friday)
TUE (Tuesday)
SAT (Saturday)
WED (Wednesday)
To switch the clock display 24-hour/
AM/PM, press DISPLAY.
AM/PM, press DISPLAY.
Press the cursor buttons (
5/∞) to
set the time.
Tip
When using the 24 hour display, you can
also use the number buttons to set the
time.
also use the number buttons to set the
time.