Allied Telesis AT-6101G AT-6101G-30 Data Sheet
Product codes
AT-6101G-30
Datasheet |
IEEE 802.3af Power over Ethernet
AT-6101G
Single port Gigabit PoE injector
IEEE 802.3af Power over Ethernet
Injector
Injector
The AT-6101G Power over Ethernet Injector
provides data and power through the Ethernet
cable to PoE-equipped devices, such as access
points, IP cameras,VoIP phones and any other
equipment supporting the IEEE 802.3af
standard.
provides data and power through the Ethernet
cable to PoE-equipped devices, such as access
points, IP cameras,VoIP phones and any other
equipment supporting the IEEE 802.3af
standard.
Using the companion AT-6102G PoE splitter
even non-PoE devices can be remote powered
with all the benefits of PoE remote powering.
even non-PoE devices can be remote powered
with all the benefits of PoE remote powering.
IEEE 802.3af Detection
The AT-6101G complies to IEEE 802.3af
standard and can detect if the connected device
supports IEEE 802.3af and then provides the
power to the device. If the injector detects that
the connected device does not support IEEE
802.3af then it will not provide the power to
the connected device avoiding damages.
standard and can detect if the connected device
supports IEEE 802.3af and then provides the
power to the device. If the injector detects that
the connected device does not support IEEE
802.3af then it will not provide the power to
the connected device avoiding damages.
Power over Gigabit Ethernet
The AT-6101G can remotely power the new
generation of high performance wireless
equipments like IEEE 802.11n access points
with Gigabit Ethernet LAN interface.
generation of high performance wireless
equipments like IEEE 802.11n access points
with Gigabit Ethernet LAN interface.
Main Applications
Sensible cost savings can be achieved using the
AT-6101G PoE injector for remotely powering
VoIP phones, IP cameras, wireless access points
and any other PoE powered device.
AT-6101G PoE injector for remotely powering
VoIP phones, IP cameras, wireless access points
and any other PoE powered device.
There is no need for additional power cabling
since the AT-6101G feeds power to the
equipment through the same cable used for
data.
since the AT-6101G feeds power to the
equipment through the same cable used for
data.
Connecting the AT-6101G Power over Ethernet
injector to a UPS protected power line easily
protects the powered device from power
outages.
injector to a UPS protected power line easily
protects the powered device from power
outages.
The AT-6101G PoE injector helps in protecting
network investments. In fact there's no need to
replace the existing LAN infrastructure for
connecting PoE enabled devices.
network investments. In fact there's no need to
replace the existing LAN infrastructure for
connecting PoE enabled devices.
The AT-6101G PoE injector is usually installed
close to the LAN switch but may be installed
close to the powered device as a standard
power supply.
close to the LAN switch but may be installed
close to the powered device as a standard
power supply.
Key Features
•
Can feed power to Gigabit Ethernet
equipments
equipments
•
Power over Ethernet injector
•
Remote power feeding application
•
Short circuit protection
•
Mix Ethernet and power into a single LAN
cable
cable
•
Deliver power up to 100 meters
•
Light weight and compact size
•
Full IEEE 802.3af compliant
•
Plug-and-Play
•
RoHS and WEEE compliant
•
CE, FCC, GOST, C-Tick approved
•
UL listed
AT-6101G
IEEE 802.3af Gigabit Ethernet PoE Injector
Allied Telesis
www.alliedtelesis.com