Olitec RW400SG User Manual

 

Figure 5-13: The router attached wireless stations 

¾

 

The connected wireless station's MAC address 

¾

 

  - The connected wireless station's running status, one of 

STA-AUTH / STA-ASSOC / AP-UP / WPA / WPA-PSK /WPA2/WPA2-PSK/None 

¾

 

 - packets received by the station 

¾

 

 - packets sent by the station 

You cannot change any of the values on this page. To update this page and to show the 
current connected wireless stations, click on the Refresh button.   

If the numbers of connected wireless stations go beyond one page, click the Next 
button to go to the next page and click the Previous button to return the previous page. 

: This page will be refreshed automatically every 5 seconds. 

 

Figure 5-14: the DHCP menu 

There are three submenus under the DHCP menu (shown in figure 5-14): DHCP 
Settings

, DHCP Clients List and Address Reservation. Click any of them, and you will 

be able to configure the corresponding function. The detailed explanations for each 
submenu are provided below. 

The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, 
which provides the TCP/IP configuration for all the PCs that are connected to the router 
on the LAN. The DHCP Server can be configured on the page (shown in figure 5-15): 

 

Figure 5-15: DHCP Settings 

 - 

25 -