Olitec RW400SG User Manual

 

¾

 

 set MAC Address Filtering is enabled or disabled. You can 

select the default filtering rules of MAC Address Filtering, either Allow or Reny 
accessing the router. 

The IP address Filtering feature allows you to control Internet Access by specific users 
on your LAN based on their IP addresses. The IP address filtering are set on this page, 
figure 5-25: 

 

Figure 5-25: IP address Filtering 

To disable the IP Address Filtering feature, keep the default setting, Disabled. To set up 
an IP Address Filtering entry, click Enable Firewall and Enable IP Address Filtering on 
the Firewall page, and click the Add New… button. The page " Add or Modify an IP 
Address Filtering entry

 " will appear shown in figure 5-26: 

 

Figure 5-26: Add or Modify an IP Address Filtering Entry 

To create or modify an IP Address Filtering entry, please follow these instructions: 
1.  Effective Time - Enter a range of time in HHMM format, which point to the range 

time for the entry to take effect. For example, 0803 - 1705, the entry will take effect 
from 08:03 to 17:05. 

2.  LAN IP Address - type a LAN IP Address or a range of LAN IP addresses in the 

field, in dotted-decimal notation format. For example, 192.168.1.20 - 192.168.1.30. 

 - 

34 -