Olitec RW400SG User Manual

 

¾

  Provides wireless LAN ACL (Access Control List)   

¾

  Built-in NAT and DHCP server supporting static IP address distributing 

¾

  Supports Virtual Server, Port Triggering, and DMZ host 

¾

  Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC 

address filtering 

¾

  Supports connecting/disconnecting Internet at a specified time of day 

¾

  Supports access control, allowing parents and network administrators to establish 

restricted access policies based on the time of day for children or staff 

¾

  Supports TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP 

¾

  Supports UPnP, Dynamic DNS, Static Routing, VPN pass-through 

¾

 Supports 

Traffic 

Statistics 

¾

  Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter 

¾

  Ignores Ping packets from WAN or LAN ports 

¾

  Supports firmware upgrade 

¾

  Supports Remote and Web management 

The front panel of the RW400SG consists of several LED indicators, which is designed to 
indicate connections. Viewed from left to right. Table 2-1 describes the LEDs on the front 
panel of the router.   

 

      

 

 

 

 

 

 

Figure 

2-1: 

Front 

Panel 

sketch 

 

Name Action 

Description 

Not lit 

No Power 

Power 

Lit up 

Power on 

Lit up 

The router is initialising 

Flashing 

The router is working properly 

STATUS 

Not lit 

The router has a hardware error 

Not lit 

There is no device linked to the corresponding port 

Lit up 

There is a device linked to the corresponding port but no 
activity 

WAN/LAN 

Flashing 

There is an active device linked to the corresponding port 

Not lit 

The Wireless Radio function is disabled 

WLAN 

Flashing 

The Wireless Radio function is enabled 

 

 

        Table 2-1 The LEDs description 

 - 

2 -