Ohlins FG 470 User Manual

Technical information

Fork length: 730 mm.
Stroke: 130 mm.
Free spring length: 260 mm.

Rebound adjustment:
Base setting 9-12 “clicks”.
Maximum open valve 20 “clicks”.

Compression adjustment:
Base setting 6-16 “clicks”.
Maximum open valve 20 “clicks”.

Compression adjustment (Base valve):
Base setting 6-16 “clicks”.
Maximum open valve 20 “clicks”.

Spring pre-load adjustment:
0-18 mm (0-18 turns).

4744-95 

9.5 N/mm (marking -95).

Optional springs supplied:
 

4744-10   10.0 N/mm (marking -10)

 

4744-90   9.0 N/mm (marking -90)

Optional springs:
 

4744-85   8.5 N/mm (marking -85)

 

4744-80   8.0 N/mm (marking -80)

Oil Capacity: 
Please see specification card.
Use Öhlins high performance front  fork 
fluid No. 5 (1305-01) only.

Tighten torque:
Lower triple clamp bolt 12-15 Nm.
Upper triple clamp bolt 18-22 Nm

Grease:
Öhlins front fork grease 146-01
(red grease).

Service interval:
Every 10 hours

 

19

Fork leg, 140 Nm

Loctite 542

Screw

, 3 Nm

Both fill-up points

Cylinder tube, 80 Nm

Loctite 648

Nut, 7 Nm

Loctite 222

Screw

, 3 Nm

Seal head, 20 Nm

Piston rod/piston shaft, 15 Nm

Loctite 270

Red grease

Inside of reservoir tube

White grease, thin film

Reservoir tube, 45 Nm

Nut, 7 Nm

Loctite 222

Base valve, 45 Nm

Attach piston holder to rod

before assemble piston details!

X-ring

White grease

Rod extensioner/bolt spring adjuster

, 20 Nm

Piston shaft/rod extensioner

, 15 Nm

Loctite 270

Adjustment housing, By hand only

O-ring, No grease

Upper bushing

Loctite 601

Red grease on all other o-rings!

Lower bushing

No loctite