Quantum Barcode Reader 3.5.1 User Manual
Chapter 8 Managing Drives and Disks
Working with Tape Drives
StorNext User’s Guide
199
4
After the Status Screen informs you that the drive’s status was
successfully changed, click Close. The Change Drive State screen
shows the changed state for the drive you selected.
5
If desired, repeat steps 2 - 4 to change the state for additional tape
drives.
Cleaning a Tape Drive
8
Use this procedure to manually clean a tape drive.
1
From the SNSM home page, choose Drive > Clean Drive from the
Admin menu. The Clean Drive
screen appears.
Figure 140 Clean Drive Screen
2
Select from the Select Drive List the drive you want to clean, and
then click Apply. The Clean Drive status screen appears.
3
After the Status screen notifies you that the drive has been cleaned
successfully, click Close.
Note:
To perform this procedure, you must have at least one
cleaning tape specifically labeled for cleaning. For example,
CLN_XXX.