Q-See QSDT16PCRC User Manual

CHAPTER 8  P

.T.Z. CAMERAS

Users should first enable the P.T.Z control function of a camera and then select a port number 
in P.T.Z Protocol Setup. The values entered for each parameter should match those on the 
camera itself.

Port - Set the port number.
Baud Rate - Set P.T.Z device Baud Rate to 

match setting on camera. The default 
value is 9600.

Data Bits - Default value is 8.
Parity - Odd and even parity bit, default 

None.

Stop Bits - The Default value is 1.

The PTZ Controls can be accessed directly from the 

Main Display Interface by clicking 

on the PTZ Control icon on the right side of the display. This will replace the buttons and 

functions on the right side of the display with the PTZ controls.

You can control P.T.Z. devices by clicking on 
its display. The selected camera channel will 
be highlighted in red indicating that it is ready 
to be controlled.
Focus, Zoom and Iris (light level) are adjusted 
by the use of the + and - keys to either side.
A PTZ function (direction, zoom, etc.) will 
continue as long as the user is holding down 
the left mouse button while the cursor is over 
the button or until it reaches a physical limit.

Clicking on Set PTZ speed allows you to 
adjust the Pan Speeds, Tilt Speeds, Focus 
Speeds and Zoom Speeds for all connected 
PTZ cameras.
Pan Speed - Set horizontal rotating speed.
Tilt Speed - Set vertical rotating speed.
Focus Speed - Set camera focus speed.
Zoom Speed - Set zoom in/ zoom out 
speed.

Click 

 and a pop-up window will 

appear; users can choose different presets or 
group sets.

Click 

 to set Preset point and 

change Preset point name. Every Group 
includes multiple Preset points. If users 
select preset1, preset2 and preset3 for 
group1, preset1, preset2 and preset3 will be 
automatically accessed in sequence after 
users select group1 for auto scout.

Preset
Click 

, and a pop-up will 

appear allowing you to configure settings for  
a Preset.
Dwell- Set the dwell time for a Preset. The 
camera will wait this long before moving on to 
the next action.