Quad Speaker User Manual

Page of 4
HOME THEATRE LOUDSPEAKER CONNECTIONS
SETTING LOUDSPEAKER SIZES IN HOME THEATRE SYSTEMS
Many digital AV Processors require you to specify the size of  speakers  in all channels. 
These are usually ‘Large’ or ‘Small’.
Always choose 'Small' for the Surround channels and Centre channel whether you are using 
a subwoofer or not.
If  you are not using a subwoofer: Set the Front Speakers to  ‘Large’. Set the ‘Subwoofer’ 
option on the processor to ‘Off ’ or ‘No’.  The Front channels will receive all the system bass.
If  you are using a subwoofer: When set to ‘Small’ all the system bass will go into the   
subwoofer. If  you choose ‘Large’ the Front channel bass will be sent to the Front speakers. 
Bookshelf  speakers should be set to ‘Small’, large floor standing units  may be set to ‘Large’.  
Refer to your A/V processor manual for details on setting up your Home Theatre system. 
GETTING THE BEST FROM YOUR LOUDSPEAKERS
Phase
If   the  sound  lacks  definition  or  the  bass  is  indistinct,  this  could  be  because  you  have 
inadvertently  mis-connected  your  loudspeakers.  Please  check  the  wiring  to  all  the 
loudspeakers carefully, especially if  they are bi-wired. 
Ancillary Equipment
QUAD loudspeakers are compatible with the great majority of  audio-visual and high fidelity 
equipment - but a loudspeaker is only as good as the signal it gets. Your amplifier should have 
ample reserves of  power - a low powered amplifier can run out of  steam and the resulting 
distortion is unpleasant to listen to and could damage your speakers. A larger amplifier will 
usually sound better and enhance the reliability and performance of  your loudspeakers.
Running In
Loudspeakers are electro-mechanical and, like all mechanical systems, they need a 'running 
in' period. For the first 50 hours or so exercise care and play your system at reasonable 
volume levels. After running in, you will notice a significant sonic improvement.
Care and Maintenance
Little maintenance is required. The cabinets can be occasionally wiped with a damp (not wet) 
cloth. Spray polish, if  used, should be applied sparingly - spray the polish onto a cloth and 
then apply it to the speaker. NEVER spray the grille cloth or the speaker drive units. To clean 
the grilles, remove them first before gently brushing with a soft brush. Never use solvent 
cleaners, minor stains are best removed with soap and lukewarm water. 
INTRODUCTION
The  Quad  L-ite  Centre  is  a  dedicated  centre  channel  loudspeaker,  voiced  to  blend 
seamlessly with the other loudspeakers in the L-ite Series, though it can be used with any 
high performance loudspeakers.
A  secondary  use  could  be  as  low  level  background  sound  reinforcement 
applications where clarity and precision are a requirement.
When partnered with either a  pair of  Quad L Series loudspeakers as the Front channels, and 
the Quad L-ite Satellites as Rear Effects channels, a Home Theatre system of  outstanding 
performance  can be built up. 
Please  read  the  following  notes  carefully.  They  will  help  you  to  install  your 
loudspeaker correctly and safely.
!
Switch off  the amplifier  and  all  sources  before  making  connections  to  your  sound 
system. When you switch on the system or change sources, set the volume control to 
minimum and turn up the level gradually.
!
The position of  your Volume  Control  is  NOT  a  reliable  guide  as  to  the  maximum 
capabilities of  your sound system. Playing the system with extreme settings of  volume 
and/or  tone controls may damage the amplifier and loudspeaker and your hearing.
!
Do not connect loudspeaker terminals to the mains supply.
!
Ensure that your loudspeakers  are correctly wired and are in phase.
!
Do not subject your loudspeakers to excessive cold, heat or sunlight. 
!
WARNING: To reduce the risk of  fire or electrical shock do not expose this product to 
rain or moisture. The product must not be exposed to dripping and splashing and no 
object filled with liquids - such as a vase of  flowers - should be placed on the product. 
!
No naked flame sources - such as candles - must be placed on the product.
!
Do not place heavy objects on top of  loudspeaker cabinets. If  you play the loudspeakers 
with the grilles removed be careful to protect the drive units from children and pets.
!
Do  not  use  makeshift  stands.  Always  fit  a  manufacturer's approved  stand  using  the 
instructions and the fixings provided. Your dealer will advise you.
!
Do not attempt to dismantle the loudspeaker. There are no user serviceable parts inside 
and you will invalidate the warranty.
!
The Centre Channel loudspeaker is screened and may safely be operated close to a TV set.
1
L-ite Centre
4
HF
LF
QUAD ELECTROACOUSTICS LTD.
and Engineered by
Designed
HF
LF
QUAD ELECTROACOUSTICS LTD.
and Engineered by
Designed
HF
LF
QUAD ELECTROACOUSTICS LTD.
and Engineered by
Designed
Centre
Left
Surround
Front Right 
Rear Right  
Front Left
Rear Left
Centre
A/V
Amplifier
Front Right
HF
QUAD ELECTROACOUSTICS LTD.
and Engineered by
Designed
LF
HF
LF
QUAD ELECTROACOUSTICS LTD.
and Engineered by
Designed
LINE LEVEL
LEFT
INPUT
OUTPUT
RIGHT
QUAD L-ite Subwoofer
LINE LEVEL
Subwoofer
Front Left
Right
Surround