Nortel Networks Water System NN10043-113 User Manual

Page of 222
Chapter 8 User Management
101
SIP Provisioning Client User Guide
[Standard - Nortel Networks Confidential]
3
Click Save.
Adding a conference server user and route
To enable conferencing capability, a conference user and route must be
provisioned using the SIP Provisioning Client or the SIP Personal Agent.
Adding a conference server user and route using the SIP
Provisioning Client
To add a single conference server user and route using the SIP Provisioning Client
Note:
The Registration Length and Registration Unit fields combined
together make up the registration expiration time. The smaller the value,
the more SIP traffic generated. If you were to select a registration
expiration of every 2 minutes, then the IPCM would only register the user
for 2 minute time periods and would have to re-register the user every 2
minutes.
For security reasons, it is recommended to not keep the registration
expiration time too high. If you selected a registration expiration of 10
days, then the registration authentication process is only going to occur
every 10 days. If the user changes a password, the change would not be
noted for up to 10 days (if only registration on authentication is being
used). Also, in the unlikely event that the registration is somehow lost, a
reasonable length registration expiration would allow the IPCM to
re-register the user.
Use this client...
To set up...
SIP Provisioning Client
a conference user, and, if there is only one conference
server, a route to the conference server. (Routes
added through the SIP Provisioning Client are always
attempted simultaneously.)
SIP Personal Agent
sequential routes and rules for multiple conference
servers that include each conference server listed in a
separate ringlist.