Nortel Networks SONAR P0992639 01 User Manual
Registering individual portables /
77
P0992639 01
Modular ICS Companion Installer Guide
If a portable is registered on other systems, it will still be
available on those systems. You deregister one system at a
time.
available on those systems. You deregister one system at a
time.
Note: If you are out of range of the system, this procedure
clears registration data only from the portable.
1. Press
m ***. The display shows ADMINISTRATION
and three softkeys, SYS, PINFO, DATA.
2. Press SYS. The display shows WIRELESS SYSTEMS.
3. Press ERASE . The display shows Erase item? .
4. Press OK . The display shows Deregistering... and then
Item erased.
Measuring RSSI for a C3060
The Receive Signal Strength Indicator (RSSI) is a
measurement of the signal strength the base station receives
from the portable. The strongest RSSI value the display shows
is -44 dBm. The weakest RSSI value the display shows is
approximately -94 to -100 dBm.
measurement of the signal strength the base station receives
from the portable. The strongest RSSI value the display shows
is -44 dBm. The weakest RSSI value the display shows is
approximately -94 to -100 dBm.
Measuring undirected RSSI
You can measure the signal strength between a portable and a
system-selected base station using undirected RSSI.
system-selected base station using undirected RSSI.
1. Press
m.
The display shows
MENU.
2. Press
,
or
. until the display shows Feature
request.
3. Press SELCT . The display shows Feature: .
4. Press
8 9 8. The display shows the radio ID of
the base station to which the portable is linked, followed