Nortel Networks CTA 500dm User Manual

Installing Norstar TAPI SP   21

P0873832  Issue 05

 

 CTA 500

dm On Line Guide

4. As the installation progresses, choose the appropriate options 

and click the Next button as required.

5. Once the Setup Complete window displays, click the Finish 

button. The program is installed and a PCM icon appears on the 
desktop. 

6. To access the program, double-click the PCM icon.

When the PCM software is installed, you need to choose a TAPI line 
to enable PCM to use a TAPI-enabled device. You can change the 
TAPI line at any time by choosing Dial Using from the Tools menu, 
which calls up the Choose a TAPI line window.

1. Double-click on the PCM icon on the desktop. The PCM 

program loads and the Choose A TAPI line window displays on 
top of the program.

2. Use the pull-down menu to select the line for TAPI connection.

3. In the Address: box choose Default for a typical user 

conÞguration or pull down the menu and select your line number 
to use a speciÞc line for all calls.

4. Click OK. 

5. After restarting your PC, Personal Call Manager is ready for use.

Note: Whenever you make a change in the Choose a TAPI Line 

window (connection, address, or both), you must restart your 
PC for the change to take effect.

Note: If your prime line is Intercom, you must have line pool access 

codes in the Dialing Properties dialog box to make external 
calls. These line pool access codes will be used for both data 
and voice calls.