Nortel Networks CTA 500dm User Manual

 

CTA 500dm   3

 

P0873832  Issue 05

 

 CTA 500

 

dm

 

 On Line Guide

 

Any PC equipped with Windows95, Internet application software, 
and a 16550 UART (115.2 kbit/s capability) can use the 
CTA 500

 

.

 

The CTA 500

 

 can be used for any application that requires 

These applications include

¥ Internet access

¥ remote LAN access

¥ high-speed modem replacement

¥ CTI based applications when Norstar TAPI SP is added

¥ data transmission at up to 64 kbit/s on either channel of an ISDN 

link or 56 kbit/s on a T1 trunk

¥ supports 

 to enable the dial-up connections to use 

two channels

 

The CTA 500

 

 allows Norstar customers using digital network 

interfaces on the Norstar ICS to access Internet service providers 
(ISPs). You can connect an ISP through the public switched digital 
network (PSDN) using regular dial-up methods. 

 

You can use the CTA 500

 

 for remote LAN access applications 

when PPP is used to connect to a remote LAN.

 

The CTA 500

 

 can be used to establish a connection with an ISDN 

Terminal Adapter (PPP or MP must be supported) or another 
CTA 500

 

 for Þle transfer. You can connect two computers to the 

same ICS through their own CTA 500

 

 units, or connect them 

through the network. Using the CTA 500

 

 connection allows 

analog modems to be replaced with high-speed digital connections. 
The CTA 500

 

 does not support connection to analog or 56k 

modems.

 

With a compliant Norstar TAPI SP, the CTA 500

 

 allows 

simultaneous sessions of PPP/MP and CTI based applications to run 
on PCs.