Nortel Networks CTA 500dm User Manual
AT commands 39
P0873832 Issue 05
CTA 500
dm On Line Guide
Save Dial String
The Save Dial String Command
&Z[value=]dial string
stores dial strings. The value indicates the location of the dial string
(0-9). If no location is speciÞed, the default location (0) is used.
(0-9). If no location is speciÞed, the default location (0) is used.
The maximum length of the dial string is 20 characters. There can be
a maximum of 10 stored dial strings. Saved dial strings are not part
of proÞles.
a maximum of 10 stored dial strings. Saved dial strings are not part
of proÞles.
Result Codes
OK Appears when the command was successfully completed.
ERROR Appears when the command could not be completed.
Display Saved Dial String
The display Saved Dial String Command
&Z[value]?
returns the string stored in the speciÞed location.
The OK indication is returned on a new line following the successful
completion of the command. If no location is speciÞed, a blank line
is followed by the OK indication, and the dial string in location 0 is
returned.
completion of the command. If no location is speciÞed, a blank line
is followed by the OK indication, and the dial string in location 0 is
returned.
Result Codes
OK Appears following successful display of the stored dial string.
ERROR Appears when the location number was incorrectly
speciÞed.
speciÞed.