Nortel Networks CTA 500dm User Manual

Page of 86
AT commands   63
P0873832  Issue 05
 
 CTA 500
dm On Line Guide
returns an ASCII string containing the calling line ID information. 
This command is valid only during incoming calls and is 
independent of the Calling Line ID Delivery Control.
If the calling line ID is unknown, the returned string is UNKNOWN. 
There is no numeric form to the UNKNOWN string. If the calling 
line ID is known, it is returned as a single text string, as in the 
concatenated format of the Calling Line ID Delivery Control.
Result Codes
OK  Appears when the calling line request is valid.
ERROR   Appears when the command could not be completed; for 
example, when there is no incoming call.
Note: The absence of calling line ID information is not an error 
condition.
Caller ID Security
Caller ID security provides either call screening or call blocking 
based on a list of numbers entered by the user. Call screening accepts 
calls from numbers that are on the list while call blocking accepts 
calls from numbers that are not on the list. If Caller ID security is 
disabled all calls are accepted.
The Caller ID security list holds up to ten numbers with a maximum 
length of 13 digits. You can use Ò?Ó as a wild card character. 
Incoming calls are compared to the numbers in the list, from right to 
left, and accepted or blocked as applicable. For instance, a stored 
number of Ò535?8Ó will accept calls from Ò5-3538Ó and Ò5-3578Ó 
but not from Ò5-3523Ó.
Note: Call screening and call blocking cannot be enabled 
simultaneously.