Nortel Networks NB5PLUS4/W User Manual

7.  Select Microsoft in the Man­ufacturers box.
8.  Select Internet Protocol (TCP/IP) in the Network Protocols list, and then click  

OK.  You may be prompted to install files from your Windows ME installation CD 

or other media. Follow the instructions to install the files.  If prompted, click OK 

to restart your computer with the new settings.

 

Next, configure the PC to accept IP information assigned by the modem: 

9.  Follow steps 1 – 4 above..
10. In the Network Properties dialog box, select TCP/IP, and then click Properties. 

If you have multiple TCP/IP listings, select the listing associated with your net-

work card or adapter.

11. In the TCP/IP Settin­g­s dialog box, click the radio button labelled Obtain­ an­ 

IP address automatically.

12. Click OK twice to confirm and save your changes, and then close the Control 

Panel.

Windows 95, 98 PCs

First, check for the IP protocol and, if necessary, install it:
1.  In the Windows task bar, click the Start button, point to Settings, and then 

click Control Panel. 

2.  Double-click the Network icon.
3.  The Network dialog box displays with a list of currently installed network 

components. If the list includes TCP/IP, and then the protocol has already been 

enabled. Skip to step 9.

4.   If TCP/IP does not display as an installed component, click Add…  The Select 

Network Compon­en­t Type dialog box displays.

5.   Select Protocol, and then click Add…  The Select Network Protocol dialog box 

displays. 

6.  Click on Microsoft in the Man­ufacturers list box, and then click TCP/IP in the 

Network Protocols list box.

7.   Click OK to return to the Network dialog box, and then click OK again.  You 

may be prompted to install files from your Windows 95/98 installation CD. Follow 

the instructions to install the files.

8.   Click OK to restart the PC and complete the TCP/IP installation.  
 

Next, configure the PCs to accept IP information assigned by the Modem:

9.   Follow steps 1 – 3 above.
10. Select the network component labelled TCP/IP, and then click Properties.   If 

you have multiple TCP/IP listings, select the listing associated with your network 

card or adapter.

11. In the TCP/IP Properties dialog box, click the IP Address tab.
12. Click the radio button labelled Obtain­ an­ IP address automatically.
13. Click OK twice to confirm and save your changes. You will be prompted to re-

start Windows. 

14. Click Yes.

Note: 

For detailed information regarding the advanced features of this prod-

uct, please refer to the configuring sections in the NB5Plus4/W User 

Guide on the supplied CD-ROM.