Nortel Networks NB5PLUS4/W User Manual

CAUTION:  Any changes you make to the WLAN screen do NOT get saved auto-

matically. Clicking on the ‘Apply’ button on the individual page is not 

sufficient for the changes you made to take effect. For change(s) you 

made to any WLAN screen to take effect, you will need to perform these 

steps.

1.  Click the Apply button.
2.  Click the Restart Access Point link at the bottom of the page, which will take you 

to the System Commands screen.

Note: 

An alternative way to access the System Commands Screen to click on the 

Tools tab, then select the System Commands option.

3.  On the System Commands Screen, click Save All.  This will save all the changes 

you have made. You will still need to restart the access point for any changes to 

take effect.

4.  If you only made changes to the WLAN setting(s), click the Restart Access Point 

button for the changes to take effect. OR

5.  If you also made changes to the DSL setting(s), click the Restart button for all 

changes to take effect.

Wireless>Configuration

You can access the Configuration screen by clicking on the Configuration link.  This 

screen provides an advanced wireless network parameter settings.

Following is a description of the Wireless Configuration fields:

Option 

 

Description

Beacon­ Period  

 

The time interval between beacon frame 

transmissions, which ranges from 0 - 

65535 msec.

DTIM period  

 

Delivery Traffic Identification Map