Nokia Mediamaster 9802 S User Manual
GB 48
Transmission standards
DVB, MPEG 2
LNB / Tuner input
Connector
Connector
1x F-type (LNB)
RF input frequency
920-2150 MHz
RF input power level -20 to -70 dBm
Supply voltage
Supply voltage
13,5 /18,5 V ± 5%
Max. current
500 mA, overload protected
Control voltage
22 kHz, 0,65 V
pp
DiSEqC
Tone burst A/B or
Level 1.2
Level 1.2
RF impedance
75 Ω
RF modulator
In-/output connector IEC female / IEC male
Modulator frequency 470 to 862 MHz
Output level
In-/output connector IEC female / IEC male
Modulator frequency 470 to 862 MHz
Output level
70 ± 5dBV
Output channel
21-69
Preset channel
43
Output signal
PAL B/G orPAL I
TV SCART
Video output
Video output
1 V
pp
(± 1 dB) / 75 Ω
Audio output
0,5 V
rms
/ R
L
>10 kΩ
RGB output
Internal RGB or from
AUX SCART
AUX SCART
RGB bandwidth
5,8 MHz ± 3 dB
Fast blanking output Internal or from
AUX SCART
Status output
0/6/12 V / R
L
10 kΩ
AUX SCART
Video output
Video output
1 V
pp
(± 1 dB) / 75 Ω
Video input
1 V
pp
/ 75 Ω
Audio output
0,5 V
rms
/ R
L
>10 kΩ
Audio input
0,5 Vr
ms
/ R
L
>10 kΩ
Status input
0/6/12 V / R
L
>10 kΩ
Fast blanking input
0/2 V for RGB, bypass to
TV SCART
TV SCART
RGB input
Yes
DIGITAL AUDIO (S/PDIF)
Connector
Connector
1 x RCA
AUDIO R L
Connector
Connector
2 x RCA (R+L)
Output
0,5 V
rms
± 0,5 dB/ R
L
10 kΩ
SERIAL (RS 232) serial data
Connector
Connector
9-pin D-sub male
Signals
RS232, max. 57600 bit/s
Pin 1 DCD
(Data carrier detect) not
connected
2 RXD
2 RXD
(Receive data)
3 TXD
(Transmit data)
4 DTR
(Data terminal ready) Set to high
5 GND
(Signal ground)
6 DSR
(Data set ready) not connected
7 RTS
(Ready to send)
8 CTS
(Clear to send)
9 RI
(Ring indicator) not connected
Telephone (return channel on the phone line)
Contact
Contact
modular 6-pin jack
Protocol
V22, 1200 bits/sec
Security information
The modem connection is made according to the TNV 3 circuit
type. All other connections are made according to the SELV
circuit type.
The modem connection is made according to the TNV 3 circuit
type. All other connections are made according to the SELV
circuit type.
Conditional Access system
Embedded Viaccess. One PCMCIA interface for a Common
Interface CA module (DVB Standard)
Embedded Viaccess. One PCMCIA interface for a Common
Interface CA module (DVB Standard)
Smartcard Interface
Interface for one card according to ISO 7816
Supports embedded Viaccess descrambler.
Interface for one card according to ISO 7816
Supports embedded Viaccess descrambler.
Front panel
4x7 segment numeric LED display, Buttons: ,
(standby, progr. number up and down)
4x7 segment numeric LED display, Buttons: ,
(standby, progr. number up and down)
Other data
The model code, variant and serial number, are located on a
label on the underside of the housing.
The model code, variant and serial number, are located on a
label on the underside of the housing.
Supply voltage
95-250 V AC, 50-60 Hz
Power consumption max
27 W at 500 mA LNB load
Power consumption in
standby
standby
5 W
Operating temperature
+5° C to +45° C
Storage temperature
- 40° C to +65° C
Humidity
25 to 90 % rel humidity
Operating distance for
remote control
remote control
max 10 meters
Dimensions (w x d x h)
380 x 240 x 65 mm
Weight
1,8 kg approx
SCART sockets
TV
AUX
1
Audio out right ch.
Audio out right ch.
2
-
Audio in right ch.
3
Audio out left ch.
Audio out left ch.
4
Audio ground
Audio ground
5
RGB blue ground
RGB blue ground
6
-
Audio in left ch.
7
RGB blue signal out
RGB blue signal in
8
Switch voltage out
Switch voltage in
9
RGB green ground
RGB green ground
10 Connect to pin 10 in AUX scart
11 RGB green signal out RGB green signal in
12 -
11 RGB green signal out RGB green signal in
12 -
-
13 RGB red ground
RGB red ground
14 Fast blank. ground
Fast blank. ground
15 RGB red signal out
RGB red signal in
16 Fast blanking out
Fast blanking in
17 Video out ground
Video out ground
18 -
Video in ground
19 Video out
Video out
20 -
Video in
21 Ground (casing)
Ground (casing)
1
21
2
20
TECHNICAL SPECIFICATIONS