Ninja BL800 Owner's Manual

En
g

lis

h

 IMPORTANT: Make sure that the motor base is 

plugged in for use.

1  Place the motor base on a clean, dry, level surface 

such as a counter or table top. 

2  Align and lower the pitcher onto the motor base. 

(Fig. 1) Handle should be aligned slightly to the 

right of the “LOCK” symbol on the motor base.

3  Rotate the pitcher clockwise as far as it will go to 

lock in place. (Fig. 2) 

NOTE: The pitcher can be placed on the motor base 

two ways; the handle can be on the front right 

corner or the front left corner. (Fig. 3a, Fig. 3b)

4  Holding the top blades by the top of the shaft, 

place it onto the bottom blades inside the pitcher. 

Ensure that the top blades are seated properly by 

standing upright in the pitcher. Do not operate the 

unit if the top blades are not upright at any time. 

(Fig. 4)  

NOTE: The top blades will fit loosely on the bottom 

blades but will be secured once the lid is in place. 

TIP: When pureeing, use only the bottom blades 

for best results.  

NOTE: The bottom blades are not removable.

5  When using the top blades, ensure blades are 

properly in place prior to adding ingredients. Add 

the ingredients to the pitcher, making sure that 

they do not exceed the 72 ounce mark on the 

pitcher.  

NOTE:

 

When blending any kind of liquids, such 

as mixtures of any drinks or smoothies, do not 

exceed the “MAX” liquid mark (64 ounces) on 

the pitcher. 

NOTE: If you need to add additional ingredients 

while the appliance is processing, do not remove 

the lid. Turn the appliance off, open the pour spout 

cap and add any additional ingredients, close cap 

when complete.

6  Holding the lid by the handle in the upright 

position, place it on top of the pitcher aligning the 

arrow ( ) located on the lid with the arrow ( ) 

located on the pitcher’s handle. (Fig. 5) Press the 

handle down until you hear a click.