Nextar NCU103 User Manual

 Page 7

 Page 8

NOTE: 
Before using the remote control, be sure to
turn on the unit by pressing the POWER button 
on the front panel.

1. Power On/Off.                  

2. Mute Button

3.  Loudness Button 

4. Level/MENU UP Button    

5. SEL/MENU Button

6. Level/MENU Down Button  

7. MO/ST Button

8. A.P Button  

9. Band Button    

10. Mode Button           

11.  Tune/Seek Up And 

       Track Skip Up/FF Button

12. Tune/Seek Down And 

       Track Skip Down/REW Button

13. SCN Button

14. Clock Display /Setting Button

15. LOC Button

16. CD Track TOP/    /Radio Preset 1    

17. CD Track INT/Radio Preset 2

18. CD Track RPT/Radio Preset 3         

19. CD Track RDM/Radio Preset 4

20. Radio Preset 5/10 Tracks Down

21. Radio Preset 6/10 Tracks Up

An insulation tag was installed in your remote by the manufacturer to prevent the
battery from draining. Removing the tag from the remote before using.

BATTERY INFORMATION:
Lithium Battery: CR2025 3V
Battery Life: Approximately 6 months.

Replacing the Battery from the Remote Controller:
1) Remove the battery holder by pressing the locking tab with your thumb
    and pulling it out.
2) Replace the battery with the same type and the 

+ 

side facing up.

3) Gently push in the holder until securely locked into place. 

       WARNING:

 Do not recharge, disassemble or dispose of in fire.

 Battery leakage may cause damage to the unit.

 To avoid the risk of accident, keep batteries out of reach of children.

      Before operating the unit for the first time, or after replacing the car battery or changing the
      connections. You must reset the unit.
      After removing the faceplate, press this button with a cuspidal object. 
      This operation will erase the clock setting and some stored contents.