NEXON Video Game Controller PS10R2 LS600 -PS10 User Manual

Page of 82
Page 2/82 
 
I
NTRODUCTION
 
 
 
 
 
 
 
 
PLEASE READ CAREFULLY BEFORE PROCEEDING 
 
BASIC PRECAUTIONS 
 
Do not open the speaker system or attempt to disassemble the internal parts or modify them in any 
way. The speaker system contains no user-serviceable parts. If it should appear to be malfunctioning 
or damaged, discontinue use immediately and have it inspected by qualified NEXO service personnel. 
Water exposure: Do not expose the speaker system to direct rain, do not use it near water or in wet 
conditions. Do not place containers with liquid on speaker system as they might spill into openings. If 
any liquid such as water seeps into the speaker system, have it inspected by qualified NEXO 
personnel. 
 
SYSTEM DEPLOYMENT SAFETY RULES 
 
Read User Manual before deployment
. Before use of enclosed speaker system, 
please ensure that anyone involved in system deployment understands the rigging – 
stacking – pole mounting safety rules as described in the speaker system User Manual. 
Failure to do this exposes people to potential injury or death. 
 
Always consult qualified NEXO personnel if the device installation requires construction work and make 
sure to observe the following precautions: 
Mounting precautions 
-  choose mounting hardware and an installation location that can support the weight of the speaker 
system; 
do not use speaker system handles for suspended installation; 
-  do not expose speaker system to excessive dust or vibration, or extreme cold or heat to prevent 
possibility of component damage; 
do not place the speaker system in an unstable position from which it might fall accidentally; 
-  if speaker systems uses a stand, ensure that stand specifications are adapted, and that stand 
height does not exceed 1.40m/55”; never move the stand while the speaker is in position. 
Connection and powering precautions 
remove all connected cables before moving the speaker system; 
turn off AC power of all power amplifier units before connecting the speaker system; 
-  when turning on the AC power to the audio system, always turn on the power amplifier last; when 
turning the AC power off, always turn off the power amplifier first; 
-  when used in cold conditions, a gradual power ramp up should applied to the system on an 5 mn 
period to allow the loudspeaker components to stabilize during the very first minutes of usage. 
Inspect the speaker system periodically.