NEXON Video Game Controller PS10R2 LS600 -PS10 User Manual
Page 64/82
T
ECHNICAL
S
PECIFICATIONS
9.4 PS Analogue TDcontrollers
9.4.1 Specifications
SPECIFICATIONS
Output Section
+22 /+16/+10 dBm typical into 600
Ω load (+6/0/-6dB back panel switch).
Input Section
Maximum input level : 22dBu. CMRR 80dB @ 1kHz typical.
THD+N
0.1% @ 1kHz Typ. for +10dBm output
Noisefloor
PSTD -100 dBv for 0dB switch position (22 Hz - 22 kHz, unweighted)
Dynamic Range
111 dB unweighted (THD+N at-60dBr sine wave @1kHz relative to maximum output)
Crosstalk 104dB
Filtering & EQ.
Filtering & EQ.
L&R: 12dB/oct Low Pass, 12dB/oct High pass (crossover or overlap), 4 Parameter EQs.
Factory defined
Factory defined
Protections
VCA temp. (SUB,LF & LF), VCEQ disp. (SUB & LF), Peak Limiter (all chanels), Power
compression regulation
compression regulation
Power Supply
100-250 Volts (continuous operation), 50/60Hz. Power 9W. Peak inrush current 0.5A.
Earth-Lift.
Earth-Lift.
Conformity
Comply with safety objective of 73/23/EEC & 89/336/EEC directives. (EN60065-12/2001,
EN55103-1996).
CB scheme DK-8371, cULus 60065 AZSQ E241312, FCC part15 class B
EN55103-1996).
CB scheme DK-8371, cULus 60065 AZSQ E241312, FCC part15 class B
PRODUCT FEATURES
Audio Inputs
Two XLR-3F connectors (differential non floating L&R audio inputs, 50 k
Ω).
Sense Inputs
6 Pole Removable Strip Terminal (three amplifier sense inputs - Left, Right and Sub - 400
k
k
Ω).
Audio Outputs
Two XLR-3M connectors (balanced non floating L&R audio outputs, 51 Ohm)
One XLR-3M connector (balanced non floating Sub audio outputs, 51 Ohm)
One XLR-3M connector (balanced non floating Sub audio outputs, 51 Ohm)
Controls
Gain switch (back panel), 3 positions : -6 / 0 /+6dB.
Peak Limiter trimmer for PS & Sub
Sub Overlap / Crossover switch & Sub Gain Control (-/+ 6dB).
Peak Limiter trimmer for PS & Sub
Sub Overlap / Crossover switch & Sub Gain Control (-/+ 6dB).
Indicators
LF speakers Protect Yellow LED's (Temp. & Disp), Power ON (green), Amp Sense &
Peak LED's (green/Red)
Peak LED's (green/Red)
Dimensions
1U (19") Rack - 165mm (6.5") Depth
Weight :
2.9 kg (6.6 lbs) net
SYSTEM OPERATION
Applicable Products
PSTDcontrollers are precisely matched to the PS & dedicated Subbass, and includes
sophisticated protection systems. Use of either product without properly connected
PSTDController will result in poor sound quality and may damage the components.
sophisticated protection systems. Use of either product without properly connected
PSTDController will result in poor sound quality and may damage the components.
SubBass
Active two-way operation of the PS Loudspeakers with dedicated Subbass is included in
Analogue PSTDcontrollers.
Analogue PSTDcontrollers.
9.4.2 Front and Rear Panel view