Netcomm NTC-790 User Manual
9
Routing Features
9.1
How to configure PPTP Client
This page can be accessed by clicking on the PPTP link.
There are a couple of steps that you need to take before obtaining a PPTP interface:
1 Get connected on to the Cellular network:
To do this click on the 'Data Connection' link and in the PPP Profile Connect section click 'enable' for one of
profiles 1-4. To check that the PPP interface is UP click on the Status link and in the PPP section it should
indicate UP.
profiles 1-4. To check that the PPP interface is UP click on the Status link and in the PPP section it should
indicate UP.
For more details on enabling a data connection refer to the Data Connection section.
2 Enable PPTP:
Click on the ‘PPTP’ link and enter the PPTP server IP address and user name and passwords in the
appropriate boxes and click “Enable “ and “Save” .
appropriate boxes and click “Enable “ and “Save” .
To check that the PPTP interface is up click on the Status link and in the PPTP section it should indicate
that the status is UP.
that the status is UP.
Revision 1.55
NetComm Limited
March 2009
46