Netcomm NB1300 User Manual
www.netcomm.com.au
Rev. 2 - YML643
Page 6
NB1300 ADSL Modem
Ethernet Gateway Configuration
Before continuing, ensure you have the following items and information ready:
■
A Windows 98, ME, NT, 2000 or XP client machine with a Network Interface Card
installed.
installed.
■
Either a Network Hub and two UTP cables OR one Crossover UTP cable.
■
A telephone line with ADSL service enabled.
■
User Name, Password, VPI, VCI, encapsulation and DNS server settings for your ADSL
account (ask your ISP if unsure) .
account (ask your ISP if unsure) .
Note:
The following procedure presumes your NB1300 is set to a factory default IP
address 192.168.1.1.
Step 1: Connecting your computer to the NB1300
■
Using either a hub and two UTP cables, or just one crossover UTP cable, connect the
NB1300 Modem Router to your computer.
NB1300 Modem Router to your computer.
■
Connect one end of the ADSL phone line to the NB1300 ADSL Modem and the other end
to the wall socket.
to the wall socket.
■
Connect the power pack to the NB1300 ADSL Modem and switch on the power switch.
■
Ensure that there is a LAN link light on the NB1300.
■
Ensure that the computer you intend to use has an IP address in the same subnet as the
NB1300 ADSL Modem. (e.g. the NB1300’s default IP is 192.168.1.1 - your computer
should be on 192.168.1.100 or similar.) If you have DHCP enabled on your computer, the
NB1300 will assign your computer a suitable IP address.
NB1300 ADSL Modem. (e.g. the NB1300’s default IP is 192.168.1.1 - your computer
should be on 192.168.1.100 or similar.) If you have DHCP enabled on your computer, the
NB1300 will assign your computer a suitable IP address.
■
Ensure that your computer has a LAN link light.