Navman FISH 4500/4600 User Manual

Page of 36
4-1 Interpreting the display
The sonar displays do not show a fixed distance 
travelled by the boat; rather, they display a his-
tory, showing what has passed below the boat 
during a certain period of time. 
The history of the sonar signal displayed de-
pends on the depth of the water and the scroll 
speed setting. 
In shallow water, the echoes have a short 
distance to travel between the bottom and the 
boat. In deep water, the history moves across 
the display more slowly because the echoes 
take longer to travel between the bottom and the 
boat. For example, when the scroll speed is set 
to Fast, at depths over 1000 ft. (300 m) it takes 
about 4 minutes for each vertical line of pixels 
to move across the display, whereas at 20 ft. (6 
m) it takes only about 15 seconds.
The scroll speed can be set by the user to display 
either a longer history with less fish information 
or a shorter history with more fish details. See 
section 3-2 Setup > Sonar.
If the boat is anchored, the echoes all come from 
the same area of bottom. This produces a flat 
bottom trace on the display. 
The screen shot shows a typical sonar display 
with the Fish symbols turned Off.
Large 
school of 
fish 
Strength of echoes
The colors indicate differences in the strength of 
the echo. The strength varies with several factors, 
such as the:
• 
Size of the fish, school of fish or other object.
• 
Depth of the fish or object.
• 
Location of the fish or object. (The area cov-
ered by the ultrasonic pulse is a rough cone 
shape and the echoes are strongest in the 
middle.)
• 
Clarity of water. Particles or air in the water 
reduce the strength of the echo.
• 
Composition or density of the object or bot-
tom. 
Note: Planing hulls at speed produce air bubbles 
and turbulent water that bombard the transducer. 
The resulting ultrasonic noise may be picked up 
by the transducer and obscure the real echoes.
4 Using the FISH 4500/4600
This section explains how to interpret the 
sonar displays, when and why to use the dif-
ferent frequencies and how fish are detected 
and displayed.
Single fish
Kelp / Weed
Hard bottoms 
such as 
rock or coral 
show as wide 
bands 
Soft bottoms 
such as mud, 
weed and 
sand show 
as narrow 
bands
Bottom types
Mud, weed and sandy bottoms tend to weaken 
and scatter the sonar pulse, resulting in a weak 
echo. Hard, rocky or coral bottoms reflect the 
pulse, resulting in a strong echo. See section 
5-3 Sonar Bottom display.
Small school 
of fish
Bottom
It also describes Gain and Range and shows 
examples of some of the different sonar displays. 
Also see section 1-2 How the FISH 4500/4600 
works.
FISH 4500/4600 Installation and Operation Manual
15
NAVMAN