NEC MDG5-BNDN1 User Manual
English-8
Quick Start
To connect the LCD monitor to your system, follow these instructions:
NOTE:
Make sure to read “Recommended Use” before installation.
In order to display the maximum resolution, a display controller that can output a resolution of 2048 x 2560 is needed.
In order to display the maximum resolution, a display controller that can output a resolution of 2048 x 2560 is needed.
1. Turn off the power to your computer.
2. For a PC with DVI digital output: Connect the DVI signal cable to the connector of the display controller in your system
(Figure A.1). Tighten all screws.
For a PC with DisplayPort output: Connect the DisplayPort cable to the connector of the display controller in your system
(Figure A.2).
(Figure A.2).
Figure A.1
Figure A.2
DisplayPort cable
NOTE:
1. Please use a DisplayPort cable with a DisplayPort logo.
2. When removing the DisplayPort cable, hold down the top button to release the lock.
2. When removing the DisplayPort cable, hold down the top button to release the lock.
3. Remove the cable cover (Figure B).
To remove the cable cover, unlock the slide latch (1) on the cable cover (2) and slide the cover to the side to remove it.
Figure B
Cable cover
Slide latch
4. Connect all cables to the appropriate connectors (Figure C).
NOTE:
Incorrect cable connections may result in irregular operation, damage display quality/components of LCD module
and/or shorten the module’s life.
and/or shorten the module’s life.
Figure C
AC IN
Display Backside
Computer
To the wall outlet