NEC EXPRESS5800 User Manual
-
51
-
3.10.3 Manual Rebuild
For manual rebuild, follow the procedure below.
1. Click a degraded disk array in the Tree View.
2. Click the arrow at the right end of the Background Activities tab in the Management Window
and select Start Rebuild
and select Start Rebuild
3. Specify source and target HDDs on rebuild.
Source Physical Drive
Specify a normal physical drive used to configure a logical
drive in the critical state.
drive in the critical state.
Target Physical Drive
Specify the target HDD on rebuild.
4. Click [Submit].
During the rebuild operation, the progress appears in the Background Activities tab.
As soon as the rebuild is completed, the status display of logical drives is returned to the normal
state.
state.
NOTES:
After rebuild is completed, be sure to see the event log
to check whether one or more errors occur during the
rebuild. If a media error occurred, a message
indicating the occurrence appears before the message
showing that the rebuild is completed without any
problem.
to check whether one or more errors occur during the
rebuild. If a media error occurred, a message
indicating the occurrence appears before the message
showing that the rebuild is completed without any
problem.
To install a new HDD for replacement, wait for 90 sec
or longer after the removal of the defected HDD.
or longer after the removal of the defected HDD.