NEC M60 User Manual
English-14
Connections
Before making connections:
*
First turn off the power of all the attached equipment and make connections.
*
Refer to the user manual included with each separate piece of equipment.
Connecting a Personal Computer
Connecting your computer to your LCD monitor will enable you to display your computer’s screen image.
Some video cards and pixel clock over 165MHz may not display an image correctly.
Your LCD monitor displays proper image adjusting the factory preset timing signal automatically.
Some video cards and pixel clock over 165MHz may not display an image correctly.
Your LCD monitor displays proper image adjusting the factory preset timing signal automatically.
<Factory preset signal timing>
Horizontal
Vertical
640 x 480
31.5kHz
60Hz
800 x 600
37.9kHz
60Hz
1024 x 768
48.4kHz
60Hz
1280 x 768
48kHz
60Hz
1360 x 768
48kHz
60Hz
1280 x 1024
64kHz
60Hz
1600 x 1200
75kHz
60Hz
Compressed image
1920 x 1080
66.6kHz
60Hz
Recommended resolution
Resolution
Remarks
Scanning frequency
Connect the LCD Monitor to a Personal Computer
•
To connect the VGA IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable
(mini D-sub 15 pin to mini D-sub 15 pin).
(mini D-sub 15 pin to mini D-sub 15 pin).
•
To connect the RGB/HV connector (BNC) on the LCD monitor, use a signal cable which is available separately
(mini D-sub 15 pin to BNC x 5). Select RGB/HV from the INPUT button.
(mini D-sub 15 pin to BNC x 5). Select RGB/HV from the INPUT button.
•
When connecting one or more LCD monitors, use the RGB OUT connector (BNC).
•
The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select [IN1], [IN2] or [IN3] from the AUDIO INPUT
button.
button.
LCD monitor
LCD monitor (second monitor)
BNC x 5
BNC x 5
PC or IBM compatible
BNC x 5
Mini D-sub 15 pin
Mini D-sub
15 pin
To RGB/HV IN
To analog RGB output
To audio output