Oregon Scientific WA338 User Manual
7. Connect the power adaptor to the mains power supply.
8. Press the POWER button
on the remote control to turn on the unit.
NOTE
•
Do not use distilled water.
•
Do not use water over 40 °C.
•
Use water soluble essential oils only.
•
Switch off and unplug the unit from the mains before moving or cleaning the unit.
•
Do not overfill the water tank. Always keep the unit body dry.
•
Do not turn the unit upside down without removing the porcelain cover, plastic cover and liquid
content from the water tank.
content from the water tank.
TO EMPTY THE WATER TANK
1.
Press the POWER button
on the remote control to turn off the unit. Unplug from the mains.
2.
Remove the porcelain cover and plastic cover from the unit.
3.
Pour out the water from the tank.
4.
Put the covers back on the unit when finished.
NOTE
•
Do not pour water through the diffuser outlet.
•
If water spills onto the unit body, the power cable or the power plug, immediately wipe with a
soft lint-free cloth to remove all moisture.
soft lint-free cloth to remove all moisture.
USING THE AROMA DIFFUSER
DIFFUSION
•
Press the DIFFUSE button
repeatedly to select the desired dispersal mode.
•
The order of setting choices is high, low, and off.
•
When there is insufficient water, the blue LED indicator will flash until the water tank is filled. You
should turn off the unit by press the POWER button
, refill the water tank and then turn on
the unit and select the diffusion function again.
•
When the two orange LEDs flash simultaneously, please contact your local customer service.
NOTE
•
Do not direct the aromatic mist towards furniture or electrical appliances.
LIGHTING SETTINGS
•
Press the LIGHTING button
repeatedly to select the desired lighting mode.
•
The order of setting choices is on, candle light effect and off.
SLEEP TIMER SETTINGS
•
Press the SLEEP TIMER button
repeatedly to toggle timer settings or to turn off the timer.
•
The order of setting choices is 60 minutes, 120 minutes, and off.