Navini Networks RIPWAVE 40-00460-00R User Manual

Navini 

Networks, 

Inc. 

         

 

PMX 

User’s 

Guide 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

An optional desktop antenna is available for the 
PMX. This antenna connects to the PMX and then 
sits on a surface next to the laptop. This antenna 
should be used if optimal reception cannot be 
obtained through the original PMX antenna.  
 
 
To connect the desktop antenna to the PMX, you must first remove 
the original antenna attached to the PMX. To remove the antenna, 
turn the antenna down so that it is lying parallel with the PMX. 
Grasp the base of the antenna near its connection point and firmly 
pull the antenna away from the card. Do not grasp the top or 
middle of the antenna as it may break when you try to pull on the 
antenna. 
 
 
 
 
 
 
 
Once the original antenna is removed, connect the desktop antenna 
by inserting its connector into the port on the PMX card. 
 
 
 
 
 
 
 
Insert the other end of the antenna cable into the base unit. 
 

 
 
 
 
 
 
 
 
 
 

Note: Avoid frequently connecting and disconnecting the desktop 

 

antenna from the  PMX, as this may cause the connector on the desktop 

 

antenna to break.

 

Page 25 

060825_pv1.3_pmx_user_guide_40-00460-00Ra(4.5)