KYOCERA KI-G100 User Manual

Kyocera KI-G100 GSM Handset - Ver.

0.3

Preliminary Version - 01.1999

You can change here the PIN2 code of your SIM Card. It must contain a
minimum of 4 and a maximum of 8 digits.

Note: if you enter the wrong PIN2 code 3 times in succession, the PIN2
function of your SIM Card is blocked and you must enter the PUK2 code
to unblock it (contact your Service Provider).

65 FDN

The PIN2 code is required to enable or disable this function. If it is enabled, only
Fixed Dialling Numbers stored on the SIM Card, extensions of these numbers
and emergency numbers can be dialled. The access to the SIM memory is also
restricted. This can be used for example when you lend your phone to someone
else and wish them to be only able to call certain numbers, e.g. in your office.
This setting has no effect on the Short Messages function.

Note: switching FDN on or off may require dozens of seconds.

7 ACCESSORY

You can set some parameters for the use of your phone in a vehicle, with the
Hands Free Kit (see page 31).

71 Auto Answer

With this function activated, a call will be answered automatically after 2 rings.
This will only occur if the ignition is on.

72 Off Timer

You can set here the delay after the ignition key has been removed the phone
will be powered off. The Off Timer can be set within a range from 0 to 99
minutes.

Menus