Korg D3200 User Manual

This effect applies the Limiter to the low range, mid range, 
and high range of the input signal. You can control dynamics 
for each range to adjust the sound pressure of the low range, 
mid range, and high range in a different way from the EQ.

This effect lowers the level of input signals that are below a 
specified level.

This parameter sets the delay time of the Gate input. If the 
sound has a very fast attack, increase the delay time so that the 
signal will be input after the Gate is opened.

This is a filter with frequency control. It can be controlled by 
a envelope or LFO.

This is a wah effect that can be controlled by an envelope or 
LFO.

By selecting Manual as the Control Source, you can create the 
effect of an actual wah pedal left in a fixed position.
Alternatively, if you assign an expression pedal to control Man-
ual, you can operate the expression pedal to control the sound 
just like an actual wah pedal.

Threshold

–48.0...0.0dB

Sets the level at which compression begins to apply

Attack

0...1.00sec

Sets the attack time

Release

0...10.0sec

Sets the release time

Out Gain (Output Gain)

–24.0...+24.0dB

Adjusts the output level gain

Env.Select (Envelope Select)

L/R Mix, L/R Indiv

Switches the left/right channels between linked or independent

operation

Response

Slow, Medium, Fast

Selects the response speed

Tube Sat (Tube Saturation)

0...100

Sets the depth of vacuum tube distortion

Threshold

–48.0...0.0dB

Sets the level at which compression

Attack

0...1.00sec

Sets the attack time

Release

0...10.0sec

Sets the release time

Range

–inf, –48...0.0dB

Compression level

Env.Select (Envelope Select)

L/R Mix, L/R Indiv

Switches the left/right channels between linked or independent

operation

Response

Slow, Medium, Fast

Selects the response speed

PreDelay (Pre Delay Time)

0...200ms

Sets the delay time

Out Gain (Output Gain)

–24.0...+24.0dB

Adjusts the output level gain

Fc Bottom (Control Fc Bottom)

53Hz...20.0kHz

Sets the lower limit of the frequency to be controlled

Fc Top (Control Fc Top)

53Hz...20.0kHz

Sets the upper limit of the frequency to be controlled

Resonance

0...100%

Sets the resonance amount

Trim

0...100%

Adjusts the filter level

FilterType

HPF, BPF, LPF

Selects the filter type

Control (Control Source)

Envelope, LFO

Switches the control source

Polarity

[+]Plus, [–]Minus

Inverts the control

Dry:Wet

Dry, 1:99...99:1, Wet

Sets the balance between the effect and dry sounds

Waveform (LFO Waveform)

Triangle, Sine, Saw

Selects LFO Waveform

*LFO Speed

0.02...20.00Hz

Sets the LFO speed

LFO Step

0...256

Selects the LFO step

L-R Phase (LFO L-R Phase)

–180...+180deg

Sets the LFO phase difference between the left and right

Env.Select (Envelope Select)

L/R Mix, L/R Indiv

Links or un-links the left/right channels for envelope control

Env.Resp (Envelope Response)

Slow, Medium, Fast

Selects the response speed of envelope control

Env.Sens (Envelope Sensitivity)

0...100%

Sets the sensitivity of envelope control

Control (Control Source)

Envelope, LFO, Manual

Switches the control source

Env.Select (Envelope Select)

L/R Mix, L/R Indiv

Links or un-links the left/right channels for envelope control

Env.Resp (Envelope Response)

Slow, Medium, Fast

Selects the response speed of envelope control

Env.Sens (Envelope Sensitivity)

0...100%

Sets the sensitivity of envelope control

Waveform (LFO Waveform)

Triangle, Sine, Saw

Selects LFO Waveform

*LFO Speed

0.02...20.00Hz

Sets the LFO speed

LFO Step

0...256

Selects the LFO step

LFO Phase (LFO L-R Phase)

–180...+180deg

Sets the LFO phase difference between the left and right

Wah.Type (Wah Type)

Y-CRY, RM-A, RM-B, J-CRY, VOX, M-VOX

Selects the wah type

*Manual (Manual Control)

0...100

Sets the control position manually

DirectMix (Direct Mix Level)

0...100%

Adjusts the mix level of the direct sound

Wah Level

0...100

Sets the wah level