Korg D4 User Manual

36

You can perform steps 2–3 even during playback.

If you want to save the registered locate points as part of the 
song data, press the [STOP] key to save the song. If you turn 
off the power without saving the song, the locate points you 
registered will not be preserved.

Moving to the IN or OUT points you registered
Press the [IN (LOC1)] key or [OUT (LOC2)] key. You will 
move to that time location.

Setting the InTime and OutTime
To specify the InTime and OutTime locations used for 
track editing operations, you can simply register the 
desired time to each key as described in “Registering the 
IN and OUT locate points.” 
If you want to specify InTime and OutTime locations that 
are independent of the IN and OUT settings, press the lit 
[IN] or [OUT] key while you’re in the track editing opera-
tion; the display will change to the time of that locate 
point. Then, in the same way as when moving the current 
time location, use the CURSOR [

]/[

] keys to make 

the desired counter value blink, and turn the [VALUE] 
dial to specify the time.

By pressing the [PLAY] key at this time, you can hear 
approximately two seconds of playback starting at the 
selected time location.

The modified time you specify here will not be reflected by 
the locate point.

If you want to change the To Time or End Time for track edit-
ing operations, press the [PUNCH] key when setting the 
parameter.

By using the mixer to adjust the volume, tone, and pan-
ning for input/recording or playback of each track, you 
can create the most effective overall sound.

Adjusting the level (volume), and pan (stereo position)
Use the [TRACK 1]–[TRACK 4] and [MASTER] faders to 
adjust the levels. Use the [PAN] knobs to adjust the pan. 
While the recorder is stopped and the counter is dis-
played, moving a knob will cause its value to briefly 
appear.