Konica Minolta BP-200 User Manual

Introduction

x-20

200/250/350

Auxiliary functions

8-30

200/250/350

Au

xi

liary funct

ions

Chapter 8

Images previously stored on the hard disk can be printed overlapping copies.

The  Image Overlay  function is available only if optional hard disk HD-
504 is installed.

Position the overlay document to be stored on the hard disk.

Press the [Utility/Coun-
ter] key, and then touch 
[User Setting].

The User Setting screen 
appears.

Do not throw toner or the toner bottle into a fire.

Toner expelled from the fire may cause burns.

Select the size of the 
area to be scanned.

To cancel changes to 
the settings, touch 
[Cancel].

What do the Book 
Erase settings do?

If a Book Erase set-
ting is selected, the 
dark shadows 
around the docu-
ment or along the center of the document can be erased.

Touch [Enter].

Titles indicate the contents of the section.

Touch panel screens are shown to 
check the actual display.  

Text that appears in this manner 
describes supplemental information, 
such as precautions, references and 
actions, relating to steps. 

Text that appears in this manner 
provides answers to problems and 
questions that may occur during 
operation.  

(The page shown above is an example only.)

Text highlighted in this manner indicates precautions to ensure safe use of this machine. 
“Warning” indicates instructions that, when not observed, may result in fatal or critical injuries. 
“Caution” indicates instructions that, when not observed, may result in serious injuries or 
property damage.  

[ ]
Names highlighted as shown above 
indicate keys on the control panel, 
buttons in the touch panel, and the 
power switches.

Text that appears in this manner 
describes the function limitations 
and options required to use certain 
functions.