Konica Minolta Computer Hardware PCI-1712 User Manual

The PCI-1712/1712L package should contain the

following items:

þ

þ

þ

þ

Step 1: Insert the companion disc into your CD-

ROM drive.

Step 2: The Setup Program will be launched

automatically, and you’ll see the following
Setup Screen.

Select the DLL Drivers installation option.

(If autoplay is not enabled, please use

Windows Explorer or Windows Run

command to execute setup.exe on CD-

ROM).

Step 3: Select the Windows 95/98 or Windows

NT option according to your operating
system.

Step 4: Follow the installation instructions step

by step to complete your DLL driver
setup.

Step 1: Turn off your computer and unplug the

power cord and cables

Step 2: Remove the cover of your computer

Step 3: Remove the slot cover on the back panel

of your computer

Step 4: Touch the metal part of your computer

chassis to discharge static electricity on
your body

Step 5: Insert the PCI-1712/1712L card into a

PCI slot. Hold the card only by its edges
and carefully align it with the slot, then
insert the card firmly into place. Use of
excessive force must be avoided otherwise
the card might be damaged.

Step 6: Fasten the bracket of the PCI card on the

back panel rail of the computer with
screws

Step 7: Connect appropriate accessories (68-pin

cable, wiring terminals, etc., if necessary)
to the PCI card.

Step 8: Replace the cover of your computer

chassis. Re-connect the cables you
removed in step 2.

Step 9:Plug in the power cord and turn on the

computer

w Access the Device Manager through the Control

Panel/System/Device Manager. On the Device

Manager tab of the System Property sheet, you

can see the Device Name of the PCI-1712/

1712L listed on it.